收藏本站
24AA08/24LC08B
8.0
READ OPERATION
8.3
Sequential Read
Read operations are initiated in the same way as write
operations, with the exception that the R/W bit of the
slave address is set to ‘ 1 ’. There are three basic types
of read operations: current address read, random read
and sequential read.
Sequential reads are initiated in the same way as a
random read, except that once the 24XX08 transmits
the first data byte, the master issues an acknowledge
as opposed to a Stop condition in a random read. This
directs the 24XX08 to transmit the next sequentially-
addressed 8-bit word ( Figure 8-3 ).
8.1
Current Address Read
To provide sequential reads, the 24XX08 contains an
The 24XX08 contains an address counter that main-
tains the address of the last word accessed, internally
incremented by ‘ 1 ’. Therefore, if the previous access
(either a read or write operation) was to address n , the
next current address read operation would access data
from address n + 1 . Upon receipt of the slave address
with R/W bit set to ‘ 1 ’, the 24XX08 issues an acknowl-
edge and transmits the 8-bit data word. The master will
not acknowledge the transfer, but does generate a Stop
condition and the 24XX08 discontinues transmission
( Figure 8-1 ).
internal Address Pointer that is incremented by one
upon completion of each operation. This Address
Pointer allows the entire memory contents to be serially
read during one operation.
8.4 Noise Protection
The 24XX08 employs a V CC threshold detector circuit
which disables the internal erase/write logic if the V CC
is below 1.5V at nominal conditions.
The SCL and SDA inputs have Schmitt Trigger and
filter circuits which suppress noise spikes to assure
8.2
Random Read
proper device operation, even on a noisy bus.
Random read operations allow the master to access
any memory location in a random manner. To perform
this type of read operation, the word address must first
be set. This is accomplished by sending the word
address to the 24XX08 as part of a write operation.
Once the word address is sent, the master generates a
Start condition following the acknowledge. This
terminates the write operation, but not before the
internal Address Pointer is set. The master then issues
the control byte again, but with the R/W bit set to a ‘ 1 ’.
The 24XX08 will then issue an acknowledge and trans-
mit the 8-bit data word. The master will not acknowl-
edge the transfer, but does generate a Stop condition
and the 24XX08 will discontinue transmission
( Figure 8-2 ).
FIGURE 8-1:
CURRENT ADDRESS READ
Bus Activity
Master
S
T
A
R
T
Control
Byte
Data (n)
S
T
O
P
SDA Line
S 1 0 1 0 x B1 B0 1
P
Bus Activity
x = “don’t care”
DS21710K-page 10
Block
Select
Bits
A
C
K
N
o
A
C
K
? 2002-2012 Microchip Technology Inc.
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
24AA16-I/STG IC EEPROM 16KBIT 400KHZ 8TSSOP
24AA256-I/MS IC EEPROM 256KBIT 400KHZ 8MSOP
24AA32A/SN IC EEPROM 32KBIT 400KHZ 8SOIC
24AA32AF-I/SN IC SRL EEPROM 4KX8 1.8V 8-SOIC
24AA512-I/ST14 IC EEPROM 512KBIT 400KHZ 14TSSOP
24AA52T-I/MC IC EEPROM 2KBIT 400KHZ 8DFN
24AA64F-I/MS IC SRL EEPROM 8KX8 1.8V 8-MSOP
24AA65/P IC EEPROM 64KBIT 400KHZ 8DIP
相关代理商/技术参数
24AA08/WF15K 制造商:Microchip Technology Inc 功能描述:8K, 1K X 8 1.8V SERIAL EE WAFER ON FR - Gel-pak, waffle pack, wafer, diced wafer on film
24AA08_09 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:8K I2C? Serial EEPROM
24AA080 功能描述:整流器/与可变电容器 RED 1.8-6.0 PFD RoHS:否 制造商:Xicon 电容范围:2.8 pF to 12.5 pF 容差: 电压额定值:200 V 工作温度范围:- 35 C to + 85 C 端接类型:SMD/SMT 产品:Trimmer Capacitors - Ceramic Dielectric
24AA080-IP 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:8K/16K 1.8V SPI Bus Serial EEPROM
24AA080-ISN 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:8K/16K 1.8V SPI Bus Serial EEPROM
24AA080-P 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:8K/16K 1.8V SPI Bus Serial EEPROM
24AA080-SN 制造商:MICROCHIP 制造商全称:Microchip Technology 功能描述:8K/16K 1.8V SPI Bus Serial EEPROM
24AA081 功能描述:整流器/与可变电容器 NO COLOR 2.8-12.5PFD RoHS:否 制造商:Xicon 电容范围:2.8 pF to 12.5 pF 容差: 电压额定值:200 V 工作温度范围:- 35 C to + 85 C 端接类型:SMD/SMT 产品:Trimmer Capacitors - Ceramic Dielectric